Back to Blog
How-to Guides 2026-11-14 The Beard Club | Men's Grooming & Beard Products 4 views

Pro Beard & Hair Trimmer Maintenance: Cleaning and Blade Care

Pro Beard & Hair Trimmer Maintenance: Cleaning and Blade Care

A practical cleaning and blade-care routine for the Pro Beard & Hair Trimmer, covering brush cleaning, when to oil the blades, and how to store it between cuts.

The short version: brush after every use, oil when it sounds dry

The Pro Beard & Hair Trimmer is built for detail work, and its care routine is just as focused. After every use, brush the clippings out of the blades and wipe the body down with a damp cloth. The blades are made to resist oil and residue buildup, so the brush is usually all it takes. When the trimmer starts to sound dry, add a drop of the included trimmer oil along the blade.

That is the whole routine supported by the product information. There is no need to invent a complicated schedule or reach for extra products. The two signals to watch are visible clippings after a cut and a change in how the blade sounds.

Cleaning steps for the Pro Beard & Hair Trimmer

Work through these steps in order after each trimming session.

  1. Remove the guard and brush the blades: Take off the guide comb you were using and brush the clippings out of the blades. This is the core cleaning step the product information calls for after every use.
  2. Wipe the body with a damp cloth: Wipe down the trimmer body with a damp cloth. Keep the focus on the body rather than submerging the tool, since the supplied information describes wiping, not washing.
  3. Check the blade for residue: The DLC-coated stainless steel blades are made to resist oil and residue buildup, so the brush is usually enough. If you see buildup the brush did not lift, address it before your next cut rather than letting it sit.
  4. Listen for a dry sound before oiling: Add a drop of the included trimmer oil along the blade when it starts to sound dry. This is the supported trigger for oiling, not a fixed calendar interval.
  5. Store with the blade cover on: Put the blade cover back on before storing the trimmer. The cover is included in the box for exactly this purpose.

Why the brush usually beats a deep clean

The Pro Trimmer's blades carry a diamond-like carbon coating over stainless steel, described as providing sharp, clean cuts and resistance to oil and residue buildup. That resistance is why the brush is usually sufficient for routine cleaning. Scrubbing aggressively or reaching for harsh cleaners is not part of the supplied care instructions, and the coating is a reason to keep the routine gentle and consistent rather than forceful.

The included cleaning brush and trimmer oil are the two tools the product information names for upkeep. Keeping both with the trimmer makes the routine easy to repeat after every cut.

What the Pro Trimmer gives you to work with

  • Pro Beard & Hair Trimmer: DLC-coated stainless steel blades. The coating is the reason the supplied care guidance leans on brushing rather than heavy scrubbing.
    Pro Beard & Hair Trimmer
    Pro Beard & Hair Trimmer
  • Pro Beard & Hair Trimmer: The blades are made to resist oil and residue buildup, so the brush is usually all it takes. This sets the default cleaning method and tells you when a simple brush pass is enough.
  • Pro Beard & Hair Trimmer: Add a drop of the included trimmer oil along the blade when it starts to sound dry. Sound is the supported cue for oiling, so you do not need to guess at a schedule.
  • Pro Beard & Hair Trimmer: In the Box: Pro Beard & Hair Trimmer, 10 trimmer guides, blade cover, power adapter, trimmer oil and cleaning brush. The oil, brush, and blade cover you need for upkeep come with the trimmer.

How the guides and taper lever affect your cleaning routine

The Pro Trimmer ships with ten guide combs covering 1.5, 3, 4.5, 6, 10, 13, 16, 19, 22, and 25mm, plus a built-in taper lever for the increments in between. More guards means more pieces to keep track of. Brush each guard you used before putting it away, and keep the set together so you can repeat an exact length next time.

The taper lever is part of the blade assembly's working area. When you brush the blades, work along the cutting edge and the surrounding blade area so clippings do not collect where the lever moves. The supplied information does not describe disassembling the lever for cleaning, so keep the brush work external.

Upkeep habits that protect the trimmer between cuts

  • Keep the blade cover on in storage: The included blade cover protects the cutting edge when the trimmer is not in use.
  • Charge with the included adapter: The trimmer is cordless and rechargeable with a lithium-ion battery, charged with the included power adapter. Up to 90 minutes of cordless runtime means you are not tied to a cord mid-cut.
  • Start with a dry, combed beard: The supplied usage guidance says to start with a dry, combed beard and a guard one size longer than you think you want. Dry, combed hair is easier to brush out afterward than damp clippings.
  • Take short passes and check both sides: Short passes with mirror checks on both sides keep the cut even and reduce the temptation to overwork the blade in one spot.

What the product information does not cover

The supplied information describes brushing, wiping with a damp cloth, oiling when the blade sounds dry, and storing with the blade cover on. It does not describe washing the trimmer under running water, soaking any part, or a specific oiling interval in days or number of cuts. If you want to go beyond the brush-and-wipe routine, check the manufacturer's fuller documentation rather than assuming the trimmer is waterproof or that a set schedule applies.

The Pro Trimmer carries a two-year limited warranty. Following the supplied care steps is the straightforward way to keep the tool in the condition the warranty assumes.

Related Articles

Customer Service
Home
Products
Cart
Profile